the connor-winfield corp. 2111 comprehensive drive. aurora, il 60505. fax (630) 851-5040. phone (630) 851-4722. www.conwin.com specifications subject to change without notice. data sheet #: rev: date: page of copyright 2001 connor-winfield all rights reserved. crystal controlled oscillators the connor-winfield fthd686 is a surface mount crystal controlled oscillator (xo) with sinewave output. based on a fundamental crystal design the fthd686 is designed for applications requiring low noise, low jitter and tight frequency stability. 5.0v, 12 fthd686 - 100.00 mhz clock series center frequency 5.0v operation sinewave output frequency stability: 35ppm temperature range: -40 to 85c surface mount package tape and reel packaging rohs compliant / lead free 5.0v hf sinewave oscillator surface mount fthd686 sw045 03 01/31/07 ordering information features description 0705 fthd686 100m absolute maximum ratings table 1.0 parameter units minimum nominal maximum units note storage temperature -55 - 125 c supply voltage (vcc) -0.5 - 7.0 vdc operating specifications table 2.0 parameter minimum nominal maximum units note center frequency (fo) 50 - 100 mhz total frequency tolerance -35 35 ppm 1 operating temperature range -40 - 85 c supply voltage (vcc) 4.75 5.00 5.25 vdc supply current (icc) - - 50 ma start-up time @ 25c - - 10 ms phase noise characteristics table 3.0 parameter minimum nominal maximum units note ssb phase noise at 10hz offset - -60 - dbc/hz ssb phase noise at 100hz offset - -90 - dbc/hz ssb phase noise at 1khz offset - -110 - dbc/hz ssb phase noise at 10khz offset - -135 - dbc/hz ssb phase noise at 100khz offset - -145 - dbc/hz sinewave output characteristics table 4.0 parameter minimum nominal maximum units note load - - 50 ohm voltage 2 3 4 dbm voltage vs. supply voltage change -1 - 1 dbm spurious characteristics table 5.0 parameter minimum nominal maximum units note harmonics - - -20 dbm sub harmonics - - -70 dbm package characteristics table 6.0 package non-hermetic package consisting of an fr4 substrate with grounded metal cover. process recommendations table 7.0 solder reflow see solder profile page 2. wash ultrasonic cleaning is not recommended. notes 1.0 includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and aging fifteen years. product data sheet
the connor-winfield corp. 2111 comprehensive drive. aurora, il 60505. fax (630) 851-5040. phone (630) 851-4722. www.conwin.com specifications subject to change without notice. data sheet #: rev: date: page of copyright 2001 connor-winfield all rights reserved. crystal controlled oscillators 22 sw045 03 01/31/07 n/c hf output pin 1 2 3 4 connection ground vcc n/c 50 ohm fthd686 100.00mhz fthd686 100.00mhz date code date code .140 (3.56mm) max package outline pin connections 1 2 3 4 suggested pad layout solder profile test circuit 120c 150c 180c 260c 0 220c 360 sec. max. 120 s max. 10 s 60 s max. time temperature 260c product data sheet
|
